Pride Jazzy 1103 Ultra Standard Power Chair  "chair fault codes" Questions

.... Make sure brake release levers are in the drive position . C . Switch on the control system again and try to drive the chair . If the fault occurs again , switch off and do not try to use the ...

chair. Have checked all connections and still nothing works. Flashing lights indicates a fault. Here' the users manual which contains the fault codes for the flashing lights. Repost with more info re:

...chair code 3101 bridge voltage fault? The fix for this fault is to replace the chip in the VSI controller. This happens when you consistently drive the power chair with weak or low voltage

...the fault code. 3. you may have a loose connection and the slightest bump may give you an intermittent power off and fault the chair. Have a Tech look at the chair and see what may be the

chair to move. What should I do? The flashing lights is a fault code. Count how many lights are flashing, and let us know, then we can tell you what the fault is. Check that both free-wheel levers are

fault then try and push the chair. If it moves freely then you need to engage the motors. If you have to engage the motors you will have to power down the chair and power it back up to clear the fault

...chair and plug back in then try turning on to see if you are getting same code) 8 Controller fault Check connections and wiring replace controller 9 Communication fault check cable replace (almost ...

...codes and their meaning can be found at: http://www.pgdt.com/scenter/diagnostics/diagvsi.html This is a terrific way to diagnose the problem with your chair. A technician will have a hand held ...

...fault. 1. Turn off the chair. 2.Disengage the left motor (levers are located in front under the seat) roll the chair back and forth and re-engage the left motor. 3. Engage the left motor. 4. Turn on ...

...and there is a slight pause between the flashes that indicates a fault in the chair the number of flashes is a fault code and you should be able to look that up in your users manual Hope this ...