Select Jazzy Used Electric Wheelchair "brake controller problems" Questions

...controller, and those flash codes are located here: http://www.pgdt.com/scenter/diagnostics/diagvsi.html If the brake levers are up for release then the lights will flash. Pull up the brake levers ...

...controller rebuilt. If you need to replace a motor/brake assembly you need to contact a qualified technician who can troubleshoot further with a PP1 programmer to read the fault code history log. The ...

brake unit that will not release, a bad controller. Try the easy stuff first: 1. I would make sure the motor is plugged into the controller first. sometimes a bad connection will do this. 2. Check all

...brake) or lacks lubrication causing excess power consumpltion, then the controller will shut down at some poiunt to avoid damaging itself and/or the motor. have a helper put the chair up on cememnt ...

wwe have a pronto m41 mobility chair.the service indicator light is telling me its a right brake problem can i fix this and how. also the led lights are chasing left to right. i have to get this ...

brake will have seized and will require replacement. If its electronic, the fault would almost certainly be with the wiring or freewheel switch. As with most scooter problems, they can be difficult to

...brake should read between 30 to 60 ohms. There is a chance that the output of the VSI controller is bad. To test this swap the left and right motor output connectors from the VSI. If the error code ...

...brake at the motor there is a micro switch that the controller gets connection info as to wether or not the chair is in freewheel. I have seen these switches break and therefore the controller thinks ...

brake connections 7 Remote fault check connections and wiring replace remote(joystick) (Check cable to the joystick unplug connector at rear of chair and plug back in then try turning on to see if you

...brake. If you have cleaned the right motor plug at the controller by disconnecting it you can use a digital voltmeter to test the brake. The 2 small wires to the plug are the brake wires and should ...