...jetted tub and I would like to remove the jets and just put in a plug of some sort - making it a regular tub - any ideas no such items exist. use it like a jetted bathtub or pull it out and put in a ...
...jetted tubs for 5 years and have yet seen a screw in plug replacement for the jet. It would be very expensive to fill the holes and refinish it. You may want to look into tub liners, they to are very ...
repair but an appliance repair. Can this be fixed without tearing out walls? Or can jets somehow be plugged so I can at least use tub without using jets? Sorry, the tub will have to pulled out to find
jetted bath? Hello, You should be able to remove the access panel and just disconnect, and cap the hose that is connected to the pump for the jets and then cap the pump nipple, where the hose connects
...jetted tub. There is goop behind the jets that spews out even after a good clean! So gross. I only want to soak in the tub anyway. So how do we permanently close up the holes? We cannot afford a new ...
can you cap off an old jetted tub currently there are no solutions out there for plugging off the jets in a whirlpool tub.
tub is encased in tile with NO access. Is there a way to plug the jacuzzi line holes so I can use it as just a regular tub?? I dont want to break out the tile right now and pull the tub out to fix the
tub and disconnect the vacuum line from the pump and then reconnect and the jets come on. The "bubbler" works normally. Any assistance would be greatly appreciated. Thank You! sounds like it
tub should be plugged into a gfci outlet. If it is, there may be a reset switch on the plug it is plugged into, or there may be a switch somewhere else in your bathroom that has the reset switch on it
...air vent behind wall of tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and the water goes out the ...
72 questions posted
Usually answered in minutes!
88 Questions
58 Questions
32 Questions