Jacuzzi RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools, "makes jets whirlpool tub turn" Questions

Ad

Question about Whirlpool Home

1 Answer

...tub and the jets didn't turn on. There is no instruction manual. First the obvious, most are electrically connected to a ground fault device, ether an outlet or a breaker. BEFORE ADDING WATER, check ...

Ad

...jets can be turned on. Yesterday we were told by neighbor that previous owners used to give their dogs whirlpool baths in the tub, which caused the plumbing to clog up. They were unable to clean the ...

Ad

...jets in jacuzzi tub working When turning on the tub only 3 of 6 jets are working, 2 of them feel like they are trying to work. suggestions? Make sure the jets themselves are fully opened. Some models ...

went to turn it on We have a new Jacuzzi tub and went to turn it on and the jets didn't work. Any suggestions? check to make sure the pumps on and that its wired correctly and that all valves are open

...or turned on. we filled the tub up and turned it on it makes a humming noise put no jets. Does it have to be primed if so what should i do thanks. Jets are in the closed position or the pump is

Question about Home

1 Answer

...tub that when opened lets air into the jets that produce the bubbles. If you are experiencing too much pressure out of each jet, some of the jets if they are adjustable you can turn them down by ...

...that could be clogged or is there a separate air blower aside from the water pump that may not be functioning? Try turning the jets clockwise while they are running and see if this makes a

...tub out of its frame. You will first have to TURN OFF ANY POWER SUPPLY to the pump and any other device such as an optional heater etc. Then turn the water supply valves off and ...

Question about American Standard Home

1 Answer

makes noise) but does push water through the jets? It worked for 3 years or so but was not used much. I fill the tub with water and try for turn on the pump but the water does not come out of the jets

...tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and the water goes out the air controls. solution: check ...

Not finding what you are looking for?
Jacuzzi RapidHeat In-Line Heater U395000 [ Bathtubs and Whirlpools, Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Gene Lawson

Level 2 Expert

53 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...