Karcher K2.26 Electric Power Washer "stays time" Questions

Pressure Washer Engine will not stay running My Pressure Washer will run with no problems. I refilled the tank four times and on the fifth it would not stay running. Acts like it's starving for fuel. ...

no pressure when running. what do i do? is your bypass valve that is used only when you dont have trigger squeezed staying open all the time?

Engine wont stay running I have a Briggs and Stratton 2200 pressure washer with a 4.5 engine and I can't keep it running, you prime it and it runs for a couple seconds and stalls. It stayed running a ...

Some times the electic motor doesn't work is there a safety stop feature and if so how do you get around it? There is a safety plate inside the machine so when the machine overheats the plates come ...

Can I Use 10w-30 or sae30 motor oil in my 2700psi 2.3 craftsman power washer? 10w30 will work fine. you also can use 15w40 depending on how hot your summers are. you can stay with 10w30 just check it ...

B&S 6.5 INTEK 21" 6 SP REARDRIVE,RUNS AND B&S 6.5 INTEK 21" 6 SP REARDRIVE,RUNS AND DIES.I CLEANED OUT THE CARB AND BLEW IT OUT WITH AIR, PUT IT BACK TOGETHER,PRIMED IT AND IT STARTED AND

pilot light won't stay lit We light the pilot light and in a short amout of time,it goes out. what is causing tnis? need to be sure there is no dirt at the connection a the gas valve, next check that ...

...stays at idle? When I start the pressure washer everything runs great. POSSIBLE this look picture hose coupling with water stop put on the tap side or lime in valves after long time or a nozzle with ...

Can't remove pump from pressure washer I removed mounting bolts but pump want slide off shaft corrosion on shaft, keep tapping with hammer and levering off, spray shaft if possible and allow soak time

Honda CU2400 1-MHC has been sitting in my parents garage for about 2 years. It was used once or twice. It looks new. I tried to start it and it wouldn't. I drained the gas and put new premium gas in ...