The primer bulb doesn't fill with gas The bulb is not filling with fans when I try to prime it sounds like you hasve a cracked fuel line or a cracked primer bulb. that is why it cant prime.
...bulb should not actually fill, that said, if it is not priming your carb then there might be a tiny crack or pin hole that is letting air in as you try to prime, order and change the primer
retracts but does not fill with gas from return line Make sure that the priming bulb is not broken - if so replace. If bulb is good then the carb check valve is no good and the carb has to be replaced
bulb stays pushed down, then you have a clog or kink. To fix , pull the small tube out of the tank through the fill hole. Pull off the filter on the end and put the tube back in the tank.
primer bulb won't prime The primer bulb on my Troy-Bilt TB90BC trimmer won't prime. Fule tank is full of fuel ans blowing air in the tank, the fuel it does pick up is full of air bubbles. All lines ...
should primer bulb fll completely Prime bulbs tend to only 3/4 fill this is quite normal.
Question about Husqvarna Garden
...and the prime bubble wont fill Sounds like you have an air leak. Either in the primer bulb is split or punctured, hole or leaking fuel line or primer bulb base, and is sucking air instead of
...priming bulb pressurizes the tank, and gets fuel into the carb, but it doesn't go right through and only ever partially fills the bulb. Any suggestions or is it just new carb time? BTW, the hedge ...
how to adjust the carburetor on a srm-2501 echo How to adjust the carburetor on a srm-2501 echo line trimmer. When you start trimming it dogs out and loses power. Is it possible to clean the carb. or ...
troybuilt tb25et will not prime, bulb will not fill bulb will not fill, not getting complete suction sounds like the primer bulb has a small hole in it
550 questions posted
Usually answered in minutes!
623 Questions
215 Questions
193 Questions
129 Questions
