Troy Bilt Tb70ss Gas Trimmer "idle adjustment" Questions

idle mixtures 1 1/2 turns counterclockwise after screwing it in all the way, but no adjustment for the high speed adjustment stating " no high speed adjustment is possible", however there is

How do you adjust and which screw is the Idle air mixture screw? TB80 The idle screw is the largest of the three and will generally have spring on it and it will be above the low and high adjusting ...

...idle adjustment screws properly Before you remove or try to adjust your low and high speed jets you should always count the number of turns it takes to lightly seat the idle mixture screw and high ...

...adjustment when warm.Normally you will adjust your idle jet to 1/2-3/4 turn open from the bottom seated position.Then you will re-adjust the low speed of the engine when the engine is warm by turning ...

...idle adjustment screw that adjusts the idle speed of the weed whacker on the carburetor. Look for the throttle cable, and there should be a screw adjustment in the area where the throttle cable hooks ...

idle mix adjustment. With the engine warmed up & idling, turn that screw in (clockwise) 1/4 turn at a time until you can hear the idle speed drop a little. Back it out 1/4 turn and leave it alone.

How do i set idle for 25cc gas trimmer? look on the carb for two screw's sticking out they should have plastic guards on them just take them off and adjust the set screw's until its right it should ...

adjustment scews, one for the idle, one for the low idle mixure, and one for the high idle mixure. If all three are a flathead screw type you can make the adjustment yourself. look for the one labeled

...Idle speed adjustment screw. Turn it in, to increase idle speed (it moves the throttle plate)...turn it out to slow idle speed down. The other 2 screws are the Low mixture screw and the High mixture ...

adjusting idle speed low speed idle adjustment idle speed is adjusted by the I underneath the LH screws