Question about Air Tools & Compressors
...gallon compressor keps cycling . valve is extended and leaking air. pressure low - 40 lbs. The pressure was low, 40 lbs. I had a drain hose on bottom of tank that was leaking. So I tightened hose ...
...gallon air compressor is pre -set to fill the tank to 82 lbs. Of pressure with the adjustment set to the maximum setting. Is there a way to increase the pressure to 90-100 lbs? At the present maximun ...
Question about Ingersoll Air Tools & Compressors
...Type: Honda GX 160 Fuel Tank: .8 Gallon Pump CFM @ 90 PSI: 11.8 Max Pressure: 135 PSI Certification: UL/CSA/ASME Overview Dimensions: 43" x 18" x 26" Product Weight: 175 lbs this can be a
Question about Campbell Hausfeld Air Tools & Compressors
husky comp on 1st start builds up 75 lbs and wont restart on 1st start pressure builds up to 75 lbs motor stops running and tank will empty with use and wont restart2 nd start after 20 min tank builds
Question about Craftsman Air Tools & Compressors
...lbs, but keeps running. My 1 HP 4-gallon craftsman A/C was working just fine and then would not pump beyond 30-40 lbs. And of course it did not kick off at 110 lbs because it never gets there. I ...
...lbs.I have tried to adjust the regulator and nothing works.Would the problem be the pressure switch.???? I would say your pressure is the issue . I had a 60 gallon that was doing the same thing and ...
does not put enough air in tank compressor runs but cuts off after it puts 2 or 3 lbs. of air in tank You either have a faulty or out of adjustment regulator. Mike
head bolt torque spec for this compressor need the head bolt torque for this compressor 220-300 in lbs work from center out
head bolt torque spec need head bolt torque spec for this compressor 220-300 inch lbs work from center out
where would I find a manual for a clark air compressor model ac2002b it only gets up to about 10 lbs of pressure Needs new valves
16 questions posted
Usually answered in minutes!
69 Questions
79 Questions
34 Questions
24 Questions