...until the "filter" light begins blinking. Release the "light" and "lock/key" buttons and the "filter" light turns off. Leave unplugged 1/2 hour and press and hold water button while machine is off, ...
...until your new part arrives. I have had to wait 8 days for a compressor fan motor at one time and the customer I repaired the unit for had no other place to store there food. Note this fan has to be ...
...wait until it stops. Plug the cord back in, close the doors and wait for 1/2 cup of water to turn to ice in the freezer. Then you can put the food back in. The problem will return if the unit is not ...
...wait until the ejector blade gets to 10 oclock position this is where it calls for water. The test would be unplug the coil on the valve and put a meter lead on each one. If you see 120 volts then ...
wait until your ice maker has called for enough ice cubes to bleed out all the air trapped in the filter, unless you can dunk the new filter into a bowl of cool, clean water in your sink until all the
...until tomorrow all our food is spoiling tried cutting power source For starters, use a couple of styrofoam coolers to protect your food. Then you can wait for the tech to return. The symptoms you now ...
Question about Refrigerators
...and wait until it does the same as before. if it does then it is highly likely that the gas is leaking out slowly and let the repair man do the rest or buy new. Hope I have been of help, Good
Question about Samsung Refrigerators
...until the desired temperature is shown in the temperature display. The temperature control process for the Fridge works just like the Freezer process. Press the fridge button to set your desired ...
...plugging it in as directed by the delivery guys. Plugged in 24+ hours ago but until now it's still not cooling down but the door temperature display says it is -22C freezer and 4C fridge. Tried ...
226 questions posted
Usually answered in minutes!
418 Questions
375 Questions
204 Questions
133 Questions
111 Questions