Troy Bilt Pony 6.5 Hp Rear Tine Tiller "tiller tine install" Questions

Troy tiller tines Looking for direction on the proper configuration for installing tines on Troy Tiller. Mike they should point inwards and towards the rear of the machine

tiller you have, but many of them have a set screw or two holding each tine on. You would need to loosen the screws, and maybe polish the shaft with sandpaper and oil it to get each tine off in order.

how do i install the tines? I need a picture Did you get a picture?Where did you get the tines?  I'm looking for replacement tines but not having any luck.

I replaced tine drive belt and the problem remains with my Ardisam 3100 Earthquake front tine rototiller: the clutch will cause the tines to turn, but with virtually now power - just setting them to ...

When installing clutch drum, it turns with the drive shaft I bought a new clutch drum, after tighting it, it does not turn freely. After putting it on the base it and pulling the starter rope, it trys

tine tiller 132224 208cc.I installed a new plug,still no spark Might be a wild guess, but could you pull the flywheel and see if the key has sheared? Idea..... Before you do that,check to see what the

...tiller belt you will have to : Take a few pictures before you get started so you know how everything goes back together. - 1) Remove the belt guard - 2 ) Loosen the belt pulley and remove spring, ...

install the new belt reinstall the right side screws and wheel do the same in the left side Ps: remove the belt guide, and reverse return spring http://www.partstree.com/parts/?lc=troy_bilt&mn=21A

do you have a manual for a might mac tiller to show how the belts are installed? I was able to find the web page for the download for the pdf file you need. It is a manual with exploded views for ...

...tiller was working, after 1 swip the tines stopped workin so i put a new belt on and they still don`t move. Hello, Did you notice if the tines moved when you turned the belt pulley to install the new ...