Troy Bilt Pony 6.5 Hp Rear Tine Tiller "tiller removal wheels" Questions

trying to put on pull cord on tiller. trying to put a pull cord on 5hp briggstraton tiller please help. you remove the cover, bend three tabs and the wheel will come out. Replace the cord in the ...

how do u remove the tire off a rear rotiller Remove the pin that secures the wheel to the axle and remove the wheel. Sometimes the wheel will become rusted to the axle and can not be removed. Its best

tiller I think you have, they did make provisions on some models to "freewheel" but you have to remove the retaining pin on the wheel hubs and push the wheels inward and then reinstall the pin to keep

how do I change the belts on a troy bilt tiller how to change belts remove plastic belt cover remove the guard,belt/pulley work in the right side first: remove the rigth-side wheel remove the screws ...

...wheels turn when the engine runs, forward & reverse, but I dont want to start it just to move it. Any suggestions? The Junior tiller does not have a neutral selection. In order to free wheel the ...

changing the drive belt i have a troy built pony rota tiller I need to know how to change the drive built without a lot of problems thanks norma remove plastic belt cover remove the guard,belt/pulley ...

how do I get the wheel off of my rear tine tiller? They appear to be pressed on and use a bolt or pin to retain them, but I have soaked them with penetrating fluid and used a puller but have not had ...

...tiller was built in Feb. of 1990. http://www.mtdparts.com/webapp/wcs/stores/servlet/OperatorManualView?storeId=10101&catalogId=19502&langId=-1 Go to this website and type in PONY for your ...

I have a 17 gear lever clonks like it should do when you put it in gear, but no drive ,tines drive ok also how do i get the wheel off ? regards phil wheels can be removed by using a needle nose pliers

the tiller stalled out and now won't crank. Why? Was there oil in it? Check and see if a rock or other item is wedge in the tines. Take of the engine shroud, remove the spark plug and see if you can ...