Troy Bilt Pony 6.5 Hp Rear Tine Tiller "installing tines" Questions

why did my tines stopped working my tiller was working, after 1 swip the tines stopped workin so i put a new belt on and they still don`t move. Hello, Did you notice if the tines moved when you turned

how do i install the tines? I need a picture Did you get a picture?Where did you get the tines?  I'm looking for replacement tines but not having any luck.

Craftsman Rototiller How do I drain the gear oil from the tine drive mechanism and what weight oil should I replace it with? Mod. # 247.298610B127C I have the same unit, although newer, and just ...

what gear lube do I put in for tines The transmission holds EP-0. You can use EP-00, but if may get through the two side seals. they are both types of lithium grease. No. 2 lithium; it is a big too ...

do you have a manual for a might mac tiller to show how the belts are installed? I was able to find the web page for the download for the pdf file you need. It is a manual with exploded views for ...

How do I change the tines You have not shared which model and make of tiller you have, but many of them have a set screw or two holding each tine on. You would need to loosen the screws, and maybe ...

...installing clutch drum, it turns with the drive shaft I bought a new clutch drum, after tighting it, it does not turn freely. After putting it on the base it and pulling the starter rope, it trys to ...

I replaced tine drive belt and the problem remains with my Ardisam 3100 Earthquake front tine rototiller: the clutch will cause the tines to turn, but with virtually now power - just setting them to ...

when i turn the motor over there is no spark from the plug. mode#:247.29934 craftsman front tine tiller 132224 208cc.I installed a new plug,still no spark Might be a wild guess, but could you pull the

Troy tiller tines Looking for direction on the proper configuration for installing tines on Troy Tiller. Mike they should point inwards and towards the rear of the machine