King Kutter II Gear Driven Rotary Tiller 6ft Tiller Width, Model No. Tg - 72 - Y "ft" Questions

What is the torque spec for the head bolts model # 143.999005 Cyl. Head Bolts 200 in-lbs, 16.5 ft-lbs, 22.5 Nm

205cc =what horse power 1 hp= amount of work perfomed to raise 33,000 lbs 1 ft over 1 minute.P.L.A.N is mean effecftive Pressure x the Lenght of stoke x the mean effective Area of the piston x the ...

I have a county line 4 ft 3 pt tiller the drive shafts between the pto drive gearbox and the outer gearbox keeps popping the snapringout if it does it with a new snap ring something is worn where the ...

...breaks. Relaced 3 times when you replace the flywheel key the flywheel should be re torqued to 30 ft lbs be sure all attatching areas are clean-no oil check keyways to be sure they are in good

I want to paint my King kutter ll gear driven 6 ft tiller, But I do not know what specific color of yellow it is. Can you plaese tell me, so that I can buy some paint. Caterpillar Yellow is about as ...

just bought a 6 ft king kutter brush hog - no owner's manual with it - need to know how to set the braces can I download a manual? http://www.kingkutter.com/ Perhaps you can find it here? Hope this ...

My tiller jumps forward about 2 ft and my garden has been going for 6 years. a friend of mine said it was from hitting a rock, but I would know if it was a rock. Also I can't get a response when I ...

...store that specialises in fasteners .your gonna be looking in the neighbour hood of 80 to 120 ft pounds. remeber to always cross torque when re ...

... I've taken the housing apart to clean the rotor and the inside of the housing twice with success. afterwards, cold or not, the rotor gets up to speed without frying switched off. I've got the same ...

Engine starts but wont stay running! I can get it started with engine start but wont stay running. Gas is going to carb. Sounds like a dirty carb. Before you do anything if there is a cup on the ...