Troy Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine "removing tines pony" Questions


Question about Troy-Bilt Garden

1 Answer

can not get tines off shaft ya you have to do that properly. Get the blow up diagram. but usually there are clevis pins that must be removed. I have a 11Hp Craftsman rear tine. Those tines are removed


...Pony tiller. 6 hp, ser.# 121811201149. I can not seem to remove the tine shafts. I have pulled the bolt thru the shaft but cannot budge it. Does anyone know what I am doing wrong. Is there a trick? ...


Replace tine shaft oil seals - Junior model How do I remove the tine shaft oil seals on a Troy-Bilt Junior V (Mod # 15006, S/N M0104189)? The outside of the tine drive housing has a silver-colored ...

...penetrating fluid and used a puller but have not had any movement! Did you ever find a solution to removing your tiller wheel ? I have the same problem, tried pullers, heat, hammer, Wd40,

How does the gear box come apart on a six horse troy built tiller? Remove belt guard on left sideRemove belt, large pulley on gearbox.Remove throttle cable, idler pulley cable and shift handle.Remove ...

Wheel shaft seals on troy bilt pony 7 hp. I know I need to replace the wheel shaft seals on the left side of tiller. My question; Is it possible to remove the old seal and replace it with a new one ...

Question about Troy Garden

1 Answer

wheel removal troy bilt horse. the wheel is rusted fast to the axle.i have tried heat and do i get it off. Make sure that when you heat that you heat the wheel assembly only and not the ...

I am wanting to take the rear tine guard off my Troy built Bronco. It has become bend and I want to replace it. How does it come off? Thanks the rear guard has a long pin where the ...

Question about Troy Garden

1 Answer

my 5 horsepower pony tiller just shuts off with no warning after about 20-30 minutes of tilling and will not restart again until it cools down to the touch I have changed the spark plug, drained and ...

I have a 5 hp troybilt pony tiller. The axle seals need replacing can you describe the best way to replace them. This tiller was built in Feb. of 1990. ...

Not finding what you are looking for?
Troy Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine Logo

139 questions posted

Ask a Question

Usually answered in minutes!

Top Troy Garden Experts

Neil Hancock

Level 2 Expert

236 Answers

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers


Level 2 Expert

204 Answers

Are you a Troy Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides