Troy Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine "pull replacement" Questions

...replacement how do I get the spring back in after replacing a pull cord on a mantis tiller? Replacing the spring on this tiller can be tough. You have to get the tension spring set into the stop and ...

brittle from using gas with ethanol. I had to replace my fuel lines last spring. Prime the carb and pull a couple of times. Pull the spark plug and see if it is wet or damp. Dry and clean the plug. If

How To Replace The Pull Cord How Does The Motor Come Apart From The Transmission Or Do I Have To Do It That Way . Help Please! Thank You. The motor and trans do not come apart to replace the pull cord

starter cord replace pull cord remove top starter assy. cut grip from old rope ease rope into spool, when slack remove center screw and carefully pull out spool, tie knot in rope and thread into spool

Have an old Craftsman Tiller model 917-299440 that wont start. Pulled the plug out and laid it on the casing to watch when I pull the cord - no spark. Any ideas how to test the various parts to ID ...

Starter rope too hard to pull on Yard Machine By MTD I have already replaced the spark plug and air filter for firing. It takes all my effort to pull this rope. Also primed 3 to 5 x before pulling the

need to replace the pull rope assy. where can i buy complete pull rope assy any accredited mower shop will have the assembly for your unit better if you can find a service agent for your engine.

Install new pull rope How do I replace pull rope which broke? Do you have instructions for thiis problem? you may find someone doing it on " you tube"

I have a 4 cycle Troy Bilt TB144 cultivator and the pull chord does not catch hi remove pull cord and replace the pins