Husqvarna "Chain Saw - 16" Bar, 3 Hp "high low carb adjustments" Questions

Ad

...low and high settings on the carb With all the new EPA guidlines on emissions there are many new type of carbs.The older type was easy, If its a walbro or zama brand and it has 2 adjustment screws as ...

Ad

...high and low needles on carb polen 42 18" thanks The standard setting on needles is to screw them in all the way and then back them out 1 and a half turns. You need to set the mixtures for the ...

Ad

Question about Husqvarna Garden

1 Answer

...low and high.The low is for when the saw is in low at speed or when is not in use for cut.When you pull the handle to start cut then the adjust the high one at max speed. If you need more help come ...

Question about Poulan Garden

1 Answer

high and low adjustment screws;however the cover over the carb. seems to have an effect before and after adjustments are made to the general performance of the way she runs once warmed up. my question

Question about Ryobi Garden

1 Answer

...high and low running start saw set low speed first adjust screw in or out to get best low running then rev saw to max.and adjust max revs do the same as you did with the low speed screw to obtain max ...

...Start with 1 turn out from bottom on both and adjust from there as needed. The screw closest the engine is low speed mixture adjustment and the outer is high speed mix. adj. Hope that helps. ...

low speed adj and one is high speed adjust. Turn screws all the way in until they bottom, not too tight--turn them out 1 1/2 turns. Start saw and adjust the idle screw by turning in until it starts to

...chain saw 38cc model 2175 If the carb is adjustable, it will have two small screws on it ( maybe covered with a plastic cap) One is low speed and the other is high speed. Adjust very little at

Question about Poulan Garden

1 Answer

...so i can adjust high and low speeds start with your screws turned in. adjust the high screw to 1 turn and the low to 1/2 turn. this should get unit running. once running then you can fine tune the ...

Question about Stihl Garden

1 Answer

...the Carb Killers. You need a rebuild kit not just disassemble and clean.You have IDLE ADJUST   Low Speed adjust and High speed adjust. Low and High speed adjust have nothing to do with

Not finding what you are looking for?
Husqvarna "Chain Saw - 16" Bar, 3 Hp Logo

581 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...