Question about Porter Cable Tools & Hardware - Others
...Orbital Sander rotates but does not "orbit" My Porter Cable Random Orbital Sander model 333 pad rotates at a high speed but does not appear to randomly "orbit". This results in immediate circular ...
Question about Porter Cable Tools & Hardware - Others
...orbital sander Model 54-7206-2 and need a dust bag. Is it available, how much, and how do I order it in Canada? I just had the same problem. I couldnt find any information online.call the toll-free ...
Question about Porter Cable Tools & Hardware - Others
Orbital Sander (Quicksand) Model 333, Double insulated When sanding, it stops and starts, it sounds as thogh it is stuck and then gets going for a short while Hi, Sanders are prone to getting lots and
Question about Bosch Tools & Hardware - Others
3725Bosch 5" random orbit sander, loss of power!! When i turn on my sander under no load it runs fine.When i go to sand something it bogs right down to allmost nothing.There is no burning smell like ...
...orbital sanders. You need Makita part number 211236-8 or a bearing #6002LL. It's fairly easy to replace; remove the screw in the center of the pad and remove it. Depending on which is tighter, the ...
i have a porter cable 5" r.o.s. that is not orbiting. what is the most common resolution to this problem? random orbit sander 333-5" motor runs but the disk dose not turn Hi, The main drive belt broke
...Orbital Sander to do the edges up along the house: I'll be using a bigger sander for the bulk of the job once this is done. My problem is, the sandpaper sheets keep ripping and need to be replaced. I ...
Orbital sander flicking the sand paper off I have a Bosch Pex400 AE orbital sander constantly flicking the sand paper off. I am sanding the paint off a barge board on the house using a course sand ...
Makita 5" Random Orbit Sander the sander powers up fine but as soon as its put under load, it slows to almost a complete stop. it was working fine and then it wasn't. i checked the brushes and they ...
...sander model BO5010 for years without problems until I replaced the pad with a Porter Cable 13910, sold as compatible. Now the sander takes off, ie: increases speed with reduced control and overheats ...
2 questions posted
Usually answered in minutes!
42 Questions
31 Questions
30 Questions
24 Questions
10 Questions