spark plug wire and pulling the spark plug. Then reattach the spark plug wire and ground the spark plug to the engine. Turn over the engine a few times watching for spark. If you have no spark replace
...spark plug to a metal part of the engine, then you won't get any spark. So, here you go... 1. Remove spark plug. 2. Attach spark plug to wire. 3. Ground spark plug to metal (place the "L" on the ...
spark plug after cranking it over like you were attempting to start it cold with the choke on and then inspecting the spark if it's wet then you know it is in fact getting fuel enough to start and you
...spark plug and then reattaching the wire to the plug and grounding the plug to the engine block. Then you need to have someone to try and start it, while watching for spark. It is easier to see if ...
...spark plug and trying start it from the start turn over but won't start and try from the solenoid still no go. You need to pull the spark plug out, connect the spark plug wire and ground the plug ...
...spark plug from the black box (don't know what it is called) the wire is coming from. Can anyone tell me how to check the wire for fire, how to check the black box?? Remove the spark plug wire, ...
John deere L120 riding mower quit. No spark at the plugs. Replaced with new plugs and engine started so I began mowing. After 10 minutes engine sputtered and quit. Again no spark at the plugs. Why are
...spark plug put another spark plug and put it in and hold it to the motor and crank it to see if you are getting spark. Some models you have to have the spark plug in the motor cause some have sensor ...
...spark plug Hi Cody Maybe this will help Make sure you are getting spark at the spark plug, to do this:Remove your spark plug and check to be sure you are getting a bright blue spark at the spark ...
342 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions
