Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348 "highest setting mower" Questions

is the highest setting which is about 4" cut height. Each number for the lever position represents the inches in cut. In between numbers is 1/2" so in between 2 and 3 would be 2 1/2" cut as an example

...highest setting. Now turn that knob counter clockwise a few turns and let the deck lever all the way down. That knob will stop the lever part way down. If it mowes to high rase that deck lever again ...

...highest setting but once I drop deck to # 3 setting, belt pops off again. took deck apart and clean and greased - no luck. Help ? idler or adjustment pulley bearings worn allowing belt to ''run ...

...highest setting (5)it mows very short. After mowing only once on setting (3) the pulley has ground a groove on the adjustment We have only had the mower less than 5 months. Bought from Lowes as a ...

highest setting ( 7), it was just too slow. Also before all this,I noticed there was a little spot of oil or grease under the drive gear or transmission. Maybe the trans needs oil, and how do i put it

highest level setting to the lowest level setting very frequently. Please advise as soon as possible. Email: [email protected] Hello Kevin. Tighten up the entire heightadjustment mechanism so that

I have to set my craftsman 42 inch riding mower deck to its highest level to avoid scalping my lawn do you have the right blades on it?are they on upside down?

The blades Dont engage on my craftsman 46 " lt2000 ridding mower unless the deck is on the highest setting....... the belt is streched chang belt

...riding mower deck cuts too low when set in the in the highest position. You will have to find another way to highten the deck, different bolts, shorter springs, Or if possible, adjusting the ...