Question about Makita Tools & Hardware - Others
How to take apart the Makita 1/4 palm sander in order to replace the electrical cord? I have removed the four screws in the plastic part but it seems to have a snap section that isn't releasing. ...
Question about Dewalt Tools & Hardware - Others
The motor buzzes slowly, it seems to be labouring and the plate rotates very slowly. Its as if the motor is blocked up inside. I've taken it apart and removed as much fine dust as possible but this ...
How do I secure a piece of sandpaper on the dewalt orbit palm sander? I think your model holds the paper with glue that is on the sand paper.Just take apart the back cover of the sand paper to expose ...
7404 wont vibrate only makes an aweful noise Yes, I am on my 3rd one. Your machine has destroyed itself, and must be replaced. Sorry about that. If you choose to do so, you can take it apart and see ...
just hums It has a siezed bearing. Type your model number in here and when you take it apart, you will be able to find the bearing, and order the part. http://www.blackanddecker.com/Parts.aspx If you ...
Porter Cable belt sander Porter Cable, model 362 belt sander won't pick up dust. Can I take apart? Does sander gum up when sanding old polyurethane? Do I need service manual? Thanks try to rig the ...
Question about Wagner Spray Tech Tools & Hardware - Others
The pad on my "Paint Eater" stops turning as soon as I touch it to the wall. I just fix one.Had to take apart the transmission to see that the flat spots on the planetary gear plate where seared ...
Question about Dewalt Tools & Hardware - Others
replace sanding pad on random orbital sander dw443 How do you get it apart? You will find usually 3 torx drive screws on the bottom of the tool, remove them and the pad comes off. The replacement pad ...
Question about Porter Cable Tools & Hardware - Others
Porter Cable random Orbital Sander (Quicksand) Model 333, Double insulated When sanding, it stops and starts, it sounds as thogh it is stuck and then gets going for a short while Hi, Sanders are prone
Question about Tools & Hardware - Others
Ryobi half-sheet orbital started screeching - any way to lube it? Sander is 20+ yrs old; worked great until recently - unused for several years and now makes high-pitched noise and slows down to stop ...
31 questions posted
Usually answered in minutes!
42 Questions
31 Questions
30 Questions
24 Questions
10 Questions