Dewalt DW421 5'' orbital sander "apart" Questions

How to take apart the Makita 1/4 palm sander in order to replace the electrical cord? I have removed the four screws in the plastic part but it seems to have a snap section that isn't releasing. ...

...and the plate rotates very slowly. Its as if the motor is blocked up inside. I've taken it apart and removed as much fine dust as possible but this hasn't worked. Any help graetly

orbit palm sander? I think your model holds the paper with glue that is on the sand paper.Just take apart the back cover of the sand paper to expose the glue

The tensioner isn't working on our Ryobi BE 321 Type II belt sander. We took it apart and that part seems to be working. Is there another related part we should check? Try lubracating the slide points

...destroyed itself, and must be replaced. Sorry about that. If you choose to do so, you can take it apart and see what I mean. ( I fix these). Be

I have a sander in good condition apart from the two rubber bushes which have perished. I seem unable to get replacements for these. Can anyone provide a source. Regards Chris What kind of sander. You

...to separating the housing of the BO4510 (finishing sander) without using force? I get them 1/4'' apart, no more, then there is a noticeable obstruction. go to Makitatools.com and type in your

makita random orbit 5". The pad flew apart. Is it replaceable ? I don't see a bolt or screw holding it on. Usually there are 3 screws holding the plate to the eccentric assembly. The pad is formed to ...

just hums It has a siezed bearing. Type your model number in here and when you take it apart, you will be able to find the bearing, and order the part. http://www.blackanddecker.com/Parts.aspx If you ...

...(some sanding belts do not need to be oriented this way, but check) otherwise the belt will come apart after a few