...washer power boss 3000. I load the gasoline, start the machine, but pressure water is not coming out from the trigger. i tried so many things , but can t get started. Hi!! Some guns get stuck when ...
...power to unit. sounds like it is working. pull trigger on the gun and hardly any water comes out. turn it off and there is pressure coming out Have you tried pulling the spray nozzle tip off and ...
...washer, the motor runs fine, the pressure is fine for about 5-10 seconds then it feels like the pressure drops and the hose and the water coming out of the gun is speeding up and slowing down. Any ...
gun/trigger mechanism. All must be clear and open to perform correctly. Next, pour a few ounces of power steering fluid (or similarly LIGHT oil) into the garden hose, attach it to the pump and turn on
...washer cuts in and out continuously, two seconds of power followed by two seconds of nothing. I have tried to take the lance off to see if it is blocked, but it seems to be stuck fast. Any help would ...
...washer motor runs, filter clear, lance not blocked but no pressure Dear Davidpaulson, There are many reasons why there is no pressure. The simplest one is try a new lance. The lance you say it is not ...
...washer but when I turn it on nothing happens,I have tryed checking the hose for any blockedge which there isn't. When I used to turn it on before it used to give quick buss,which I'm guessing is the ...
...washer keeps cutting out. If it is a gas powered machine and it cuts out when you release the spray gun trigger, it means that your unloader valve is stuck closed. It would help to have more ...
Power washer starts, water to washer on but no water pressure come out the hose this with the engine running? If so there eigther is a restriction in the main water feed or the pump is damaged or ...
95 questions posted
Usually answered in minutes!
3 Questions
1 Questions
1 Questions
