Pride Mobility Products Pride Mobility Victory 10 - Four Wheel Scooter "wheel drive help stop" Questions

...wheel mobility scooter. This particular model is giving me lots of problems ( 11 repair in 1 year). Want to find a auto repair dealer to fix the problems and need a schematic. Scooter stops while ...

...drive it...noise should dissipate." http://www.fixya.com/support/t2847914-click_clunk_when_moving_from_right_rear Mine was the tire/rim problem. Here's what I did: 1. Separate rear and front sections ...

Wheel scooter green light flashing but it said it is charge it wont go forward the green flashing light indicates an error with the scooter. Count the number of flashes 4 flashes pause 4 flashes pause

...head that will flash. Count the number of times it flashes get back to me. Block the scooter drive wheels up so they  spin free. Set the scooter for slow, lock the drive lever down so the drive ...

...stop just slows down a little, can you help. usual cause of this is the throttle (wig-wag ) controll potentiometer has worn out.to test put the scooter against a wall and get a freind to lift up the ...

My Alante Jr power chair stopped working. when plugged in ,the charger light is green which means a full charge but the led lights all ten of them on arm continuous go from side to side without ...

I have a CelebrityXL8 I have had it to a dealer with no results it has beep code 1/2 and 1/3 I have had it in to a local dealer who had two other XL8s he was having same trouble. The scooter one day ...

...wheel mode and is not in drive mode. Re-Engage the free wheel lever which is located down near the rear wheels (normally a yellow or red lever). If you hear a beeping noise, the beeping you hear is a ...

...drive wheels are off the ground. Now apply power until the wheel just starts to move..Does the motor stop at some point, does the meter suddenly deflect upward at anytime? Remember the power setting ...

...drive it...noise should dissipate." http://www.fixya.com/support/t2847914-click_clunk_when_moving_from_right_rear Mine was the tire/rim problem. Here's what I did: 1. Separate rear and front sections ...