Coleman Powermate Powermate 5000W Generator "change oil" Questions

Ad

...change oil today on a 27KW liquid cooled generator today. I started it let it run for 10 min. then changed oil. After oil change went to start it would not, said low battery then check battery. Repl ...

Ad

change the oil and what weight for winter use you should change the oil once a year to keep the moisture out Engine oils of any grade has a life weather you run the engine or not ,,In this case if the

Ad

Question about Pramac Electrical Supplies

1 Answer

oil change Bought this generator after hurricane and lost manual in aftermath. I don't know how to change the oil. There are two 14mm bolts on both sides (lower) of the motor. Unscrew one or both and ...

Question about Briggs & Stratton Electrical Supplies

1 Answer

...change the oil filter when you changed the oil I am assuming it has one. If it has a filter some of them have a check valve in side and this valve may not be operating properly.Also you might try ...

Question about Coleman Electrical Supplies

1 Answer

...air cooled.I'm not sure what type of oil is needed? Hi and welcome to FixYa, I am Kelly. Oil changes are supposed to be every 100 hours. You should use SAE 30 WT (non detergent) oil for at ...

and change oil after 10 hours of operation.  It may seem too often, but it is about the same interval of oil change as the cars had back in the days when they were not equipped with an oil filter

Question about Coleman Electrical Supplies

1 Answer

change oil in my model 6250 powermate. Thanks For some reason people think that the oil goes bad in 2 weeks because it is a small engine, but if you compare 3,000 miles on your car to hours, you would

We have a Maxa ER 5000 Tecumseh Generator, changed the oil and spark plug, no fire. How do you check the low oil switch? It ran before we changed plug and oil, now it won't start. how do you reset or ...

Question about Honda Electrical Supplies

1 Answer

oil change Find the correct grade oil ,remove drain plug ,when completely drained refit the plug and fill with new oil to correct level change filter if applicable.

Question about Onan Electrical Supplies

1 Answer

proper level. If oil level is fine, I would install an auxiliary oil pressure gauge . If oil pressure is normal, I would change the oil sender unit. If oil pressure is low, I would change the oil pump

Not finding what you are looking for?
Coleman Powermate Powermate 5000W Generator Logo

849 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...