Northstar Generator 9 Hp, 5500 Watt, Gasoline "voltage regulator" Questions

...voltage regulator, I adjust the engine RPM by using a digital voltage meter that has a Hz setting. Adjust the governor untill the meter displays 60 Hz. With the geneator ...

...voltage regulator for 'excitation' which is the term describing a magnetic, revolving field. This magnetic field 'induces' voltage into the stator windings (stationary outer winding), producing ...

...voltage regulator.There are 3or4 small adjustable "pots" on the circuit board of the regulator.You must connect an analoge volt meter to the output of the generator for this adjustment. Adigital will ...

my regulator is not working, may I change for other one? HOW MUCH IS YOUR VOLTAGE REGULATOR 9190087003 INCLUDING SHIPPING COST TO MALAYSIA THANK YOU JIMMY

...at 60Hz. Thanks for any help! Ray Engine speed controls 60 Hz. The voltage regulator controls the volts out. Check for worn brushes if it has them. Otherwise look at replacing the voltage

...problem is most likely with brushes/ commutator rings, or voltage regulator. Some voltage regulators have an adjustment screw to bring voltage up/down (adjust to proper rpm/cycles first). Good ...

...2v on the 220 outlet and I checked the brushes they are ok what else could make the voltage drop , Help me please I have no electricity . John Your voltage regulator is shot. Needs voltage

...Voltage regulator, rotor, or stator are at fault here. Flash the fields F1 and F2 to see if you can produce voltage. Flashing consists of connecting positive from a battery (9V or 12Vdc) to F1 and ...

voltage regulator (easiest thing to do first) now the ac breaker stays on but the output voltage is 150V. Any ideas or suggestions woul be greatlyappreciated. I am not able to find a voltage regulator

...voltage regulator. Also, make sure your rings are cleaned and your brushes have a good length and that they sit right on the rings. Clean the rings with 150 to 200 grit emory cloth until you see the ...