Question about Coleman Electrical Supplies
ideas? Generator runs fine at full speed and puts out 120/240 volt and 12V DC The control board that senses load (current) is not working.It should drop to low with no output current. (nothing running
Question about Honda Electrical Supplies
generator inverter that will run perfectly for any amount of time, then with no warning just stop generating and idle. No overload alarm. No oil alarm. Nothing will just idle. If you shut it off for a
Question about Porter Cable Electrical Supplies
...generator won't power anything; engine runs, low rpm I have a Porter- Cable 10,000 watt generater with a 20 hp honda v twin engine. It has less than 40 hours on it. First I want to know what grade of ...
Question about Honda Electrical Supplies
...idle will kick up and it will take a load. this doesnt fix the problem you need to more than likely need to have the soloniod replaced it is located behind the door. Its the white plastic thing ...
idle it runs fine. Once you let it go it goes to half speed and starts to surge every 10-15 seconds. Saturday I played around with the choke flapper and throttle by hand and it stopped surging and ran
low voltage at the wrong frequency, then be forced to tolerate a sudden change in frequency and voltage. Personally, I would find the pin that holds the solenoid linkage to the governor, and remove it
58 questions posted
Usually answered in minutes!
549 Questions
64 Questions
57 Questions
47 Questions
