Dewalt DW433KT Heavy Duty 8 Amp 3 Inch By 21 Inch Variable Speed Belt Sander Kit With Dust Canister, Case, And Inversion/Sanding Frame "tightening belt sander" Questions

belt sander adjustment bought used sander; went to use it and belt slides off sideways, tried to tighten ;but belt still slides off to the side There should be a knob on the front of the sander which ...

Belt Sander When I operate my belt sander, the belt rides off. I have engaged the lever to tighten the belt. Is there something else I need to do? All sander will have two adjustments. The first is to

...Belt sander - can't align belt tracks to thee inside I have a Tool Shop 3'' x 21'' belt sander Model s1t-sw3-76 that has worked great for years. Now my belt tracks to the inside and the adjustment ...

...belt sander. Turn it up and the belt will drift in one direction. Turn it downward and the belt will drift in the opposite direction. play with this leveling screw/knob until you reach a good balance ...

...Belt/Disc Sander, Model BD4600. Even with a new SANDING belt, it slips or stops as soon as a piece of wood touches it. The yellow gear on the right changes the position of the belt on the roller, but ...

...then teh belt will come off quickly. At this site, look at part # 68, 69, and 70 ...

sander everytime I turn it on. Even when I turn the dial it to tighten it or move it over it keeps on sliding off. You need to turn the dial slowly. If the belt starts to come off turn the knob in the

BELT SANDER DOESNT ROTATE MOTOR COMES ON, BUT BELT WONT MOVE Check to see if the drum is turning. If it is you need to tighten the belt tension and adjust for runout. If not you have a more serious ...

cannot tighten then belt on a skil 594 belt sander Have you tried the next smaller sized belt? If you tried a 24", have you tried a 21"? ... or, if you tried a 21", have you tried an 18"? ... etc.

belt sander runs until I put pressure on it I've taken off the cover and my drive belt is intact and doesn't seem stretched out or worn. but when I put pressure on the belt the motor runs fine but the