Clarke Power Products Inc AC2001 2HP 4 Gallon Pancake Tank Compressor "turn" Questions

Ad

Question about Air Tools & Compressors

1 Answer

...and breaker kicks off when starting Rmove the drive belt and check the motor.  It should turn very freely by hand and if turned on should start up easily.  If it turns hard check the ...

Ad

Question about Campbell Hausfeld Air Tools & Compressors

1 Answer

the air compressor will not turn on it is plugged in, and when I turn the knob to turn it on, it will not turn on Is the breaker tripped?

Ad

Question about Coleman Air Tools & Compressors

1 Answer

my portable air compressor turns on but wont turn my portable air compressor turns on but wont kick off,keeps running and when i manually turn it off it wont turn back on Check the operation of the ...

Question about Alltrade Air Tools & Compressors

2 Answers

All Trade 5 Gal just humms wont turn on i turn on the air compressor and all i hear is the humming wont turn on to build up pressure in the tanks The start capacitor has gone bad. Needs to be replaced

Question about Porter Cable Air Tools & Compressors

1 Answer

Air has started leaking around the plus/minus knob on the front of my "Porter Cable C2002 150 Psi 6 Gal Compressor." As a result it no longer can fill up with air. What can I do to fix it. ...

Question about Campbell Hausfeld Air Tools & Compressors

1 Answer

...size pulley would depend on the speed of the motor. To get a good volume of air, the pump needs to turn about 800 to 1000 rpm(most pumps have max rpm at that range, good idea to check ). Gas engine ...

Question about Puma Air Tools & Compressors

1 Answer

...test. Run compessor till you have over 100lbs in tank then unplug from power. At this point try to turn the motor /pump by hand, it should turn rather/very easily (this test is hard to do if the ...

Question about Air Tools & Compressors

1 Answer

Motor turns about 1/4 turn and trips the breaker. The belt turns the pump easy. Was running fine. the motor start cap is shot

Question about Square Air Tools & Compressors

1 Answer

Switch fails to turn on pump properly When pressure reaches the cuton point, the pump turns on momentarily, then turns off and all pressure is lost. After an interval (up to 20 seconds) the cuton ...

Question about Dewalt Air Tools & Compressors

1 Answer

why does my compressor just buzz when I turn it on? after plugging in my dewalt D55141 Emglo compressor I flip the on switch to "on" and All I got was a buzzing noise that (more than likely)

Not finding what you are looking for?
Clarke Power Products Inc AC2001 2HP 4 Gallon Pancake Tank Compressor Logo

92 questions posted

Ask a Question

Usually answered in minutes!

Top Clarke Air Tools & Compressors Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you a Clarke Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...