Humidity control worked for first year, then nothing. Still runs at 3hr./6hr.option. What part # do I need to fix the Humidity control, its not specifically listed on the repair parts list. Or could ...
Question about Dehumidifiers
...control and the humidity number stays at 97 but when I put a hygrometer inside the unit it read 47, so what could be wrong. It is in an AC cooled room with a dehumidifier. There could be several ...
...and humid in your area, set the humidity extraction level between 35 & 40%. If you have a mechanical control, turn the knob to Maximum. Hope this helped you, Bradleyjo. Thanks for choosing
...control knob numbers mean. Does the lower the number mean less humidity? If you have an analog unit the humidity extraction knob should be turned to Maximum. If you have an LED screen, the arrow down ...
...humidity control is no longer calibrated,the control knob has been removed and replaced on the control shaft in the wrong position(if its a round and not not a "D"shaft control) or the coils,both ...
...you need dehumidification? Put a free-standing humidity meter near the unit to check. If you still want to run the dehum, take the humidity sensor out of the line and control the unit with a
...humidity level you set the control to, is not the amount extracted from the air. It's the level you want it to maintain. The higher the percentage level, the more humidity stays in the house. The ...
Question about Dehumidifiers
...that and the displayed humidity level is higher than the one you've set as the target, then there's probably a problem with hygrostat or control unit, in which case contact [email protected]
Question about Dehumidifiers
...control board issue? Verify the humidity reading with another device. Perhaps the humidity sensor is dirty or bad. Another possibility is the switching device that runs the compressor and fan is ...
I have a GE Dehumidifier 40 pint. The power to the unit is on,display shows on, I am able to adust the humidity control, but it will not cycle on. The humidity control is probably bad. Get it replaced
137 questions posted
Usually answered in minutes!
312 Questions
70 Questions
66 Questions
53 Questions
49 Questions
