allen & heath xone 42 fader problem channel 1 allen & heath xone 42 fader problem channel 1 (phono) keeps working, even if the fader is down at 00 Hello, Carbon track on fader 1 is open because of ...
No volume control with 2 faders on Mackie CR1604 mixer I have an older Mackie CR1604 mixer (not the newer VLZ Pro model) that has 2 channels that don't work correctly. With the faders positioned ...
...need to be cleaned. If all other functions work for those channels, the most likely problem is the fader itself. These can fail and operate more like switches rather than faders. Without witnessing ...
What type fader should I order for Behringer 2442FX where can I order this Fader I would contact Behringer directly..here BEHRINGER Limited Warranty You may need the manual here Behringer XENYX 2442FX
my mackie 1604 vlz 16channel has a problem, it changes sounds during the use and faders need to be cleaned. why is it changing sounds on me...? If the faders have become noisy, they may be changing ...
...should be accessable with removing the back of the unit. If you have had a spill of liquid into the faders, then you know what the problem is and requires extensive work to replace faders. You could ...
...Check the possibility of marginal connectors. You MIGHT try putting a small bit of CRC226 into the fader for that channel if it might be the fader. CRC226 is available in the electrical dept of Home ...
...problems programming or using the unit - its ok in its own way - the behringer LC 2412 ontroller. The problem comes in the form of what on old desks I would have called "pre heat" - I.E. ...
...on how to repair these preamps? Thanks in advance! Jake NEVER, NEVER put contact cleaner into the faders!!! It removes the lube and the faders will be damaged in short order. Try using CRC226 ...
141 questions posted
Usually answered in minutes!
35 Questions
24 Questions
14 Questions
13 Questions
