Mackie 1604 Vlz3 16 Channel Mixer "fader" Questions

No volume control with 2 faders on Mackie CR1604 mixer I have an older Mackie CR1604 mixer (not the newer VLZ Pro model) that has 2 channels that don't work correctly. With the faders positioned ...

Hi i have broken 1 of my faders off of my pioneer djm 400 mixer but it isnt snaped can i repair myself??? The fader pot will need to be replaced. There is no way to glue or repair the tab. You will ...

How do is fix my Numark m6 bleeding cross fader /it's most likely a defective fader, but before replacing it, get a can of Deoxit5 or fader cleaner and spray inside the fader, then move it the full ...

What type fader should I order for Behringer 2442FX where can I order this Fader I would contact Behringer directly..here BEHRINGER Limited Warranty You may need the manual here Behringer XENYX 2442FX

allen & heath xone 42 fader problem channel 1 allen & heath xone 42 fader problem channel 1 (phono) keeps working, even if the fader is down at 00 Hello, Carbon track on fader 1 is open because of ...

...need to be cleaned. If all other functions work for those channels, the most likely problem is the fader itself. These can fail and operate more like switches rather than faders. Without witnessing ...

PEAVEY 6 CHANNEL MIXER (PV6) - Right Fader Crackles the right main fader is very crackly. There are quite a few (a dozen?) points where the sound cuts out very briefly but completely. If you leave the

faders not working properly on am844d right channell goes in out when I wiggle the main L/R fader. Some of the channel faders are eractic. The level of volume is not responding right to fader movement

What is the value of mackie's faiders and master faders The channel faders will be a 10K with standard fader taper. The master fader is a 50K dual, with standard fader taper.

how hard would it be to change a fader control on a peavey escort 2000 Changing faders USUALLY involves removing all panel hardware so that circuit board can be removed to get at the fader. It is ...