Goldstar DH504EL Dehumidifier "stuck full" Questions

. . . Can you help? Sounds like your float is stuck in the full position, or the sensor that shows full is stuck on full. If tank is empty but shows full, problem lies where full signal is coming from

...full because switch is tripped or stuck in tripped position. Take out bucket and inspect plate it sits on. May be stuck or spring not providing enough tension. Increase tension on spring so empty ...

...full most likely stuck in up position.if so try freeing it may need to be cleaned where it is hinged.if this is not the issue there is a switch which this arm pushes in when water rises inside ...

...stuck in the full position. Its a plastic piece near the top side and when the water level gets high enough it floats the piece up to turn off the unit. It can sometimes get misaligned when changing ...

...is it full of water if not maney times it senses a full tank by a scale on the bottom of the water pan try to pull up on the plate where the bucket sits make shure its not stuck let me know pls ...

stuck in the "full" position then you'll probably have found the problem. If these suggestions do help you solve the problem, please give my reply a rating to help others judge my knowledge / guessing

full', because either the water collection bucket is not installed properly or the float valve (if you model has one) in the top of the bucket, is stuck in the "UP' position. Turn the unit OFF

...full. Remove the bucket and check the float valve in the top of the bucket. If it's stuck in the down position, jiggle the arm to get to return to the UP position. Be sure to turn the unit OFF ...

unit only runs a few seconds and then shuts off screen reads ch 01,bucket full light blinking If the water reservior is empty then the float is stuck in the full position.

...dehumidifier bucket full auto shut off but bucket is empty auto shut off keeps happening when the bucket full light comes on but is empty the float switch above the tank might be stuck. or ...