Panasonic Lumix DMC-TZ50 Digital Camera "lens focus" Questions

...focus. Lens retracts ok too. I went through troubleshooting for stuck lens (incase it was not fully extended) - removed battery, memory card, used air, and paper to dislodge sand - but none improved. ...

...lens to focus.remove battery and tap on the lens hood on your palms, replace battery and switch on to see if there was any change. repeat to see if the drive gets corrected, if not the camera must be ...

...focus error lens does not retract when turned off, and will not focus. when the camera is turned on the zoom lens retracts then extends again and reports "system error(focus)". there is a small logic ...

...out of focus the camera does not focus well... it beeps and it takes the pic but it does not focus sometimes a green box appears but it is our of focus lens gear fault, need servicing and dust ...

lens assembly, it can jam the ring, not allowing it to focus. Your best shot to remedy this (short of repair) is to get a can of compressed air and spray it into the front of the lens assembly, trying

...lens to 6x or 7x and beyond, the picture on both the LCD and after it's taken is out of focus. This happens outdoors with landscapes, fixed images on buildings, etc. I used to have clear images at ...

...lens came out in it's outermost position. This made the cogwheel reconnect to the motor and focus was obtained again. Now the camera works fine again. I would recommend that you take a cleaning cloth ...

tz1 buzzing noise The only moving parts is the lens, so grinding noise is from the lens focusing gears. Taking picture will focus and stop moving.

...lens won't focus, that is the message you get. The focus lens gears are typically incredibly small, and the tiniest hair, or piece of dirt will jam them. I have not fixed this particular model, but ...

focus is blurred Hi there its happens when the lens not ready for work. Some how its not able to stable his focus method. That's why its stuck. There is a chances of lens guide pin disturbed or ...