Canon PIXMA MX850 Multifunction Printer "cartridge holder stuck" Questions

... Hello. That error message means that the cartridge holder is blocked. Turn the printer off and then manually move the cartridge holder a few inches. The holder could just be stuck. Hope this helps

...cartridge holder will move into a position then stop it is now in the position to remove your ink cartridges !Now you want to press down on the semi-circular tab to release the carthridge and then ...

printer shows error E 2 7 and alarm light is on also cartridge holder is stuck on right hand side and wont slide to the left for cleaning Sounds like the ink absorber might be full

...cartridge/either needs cleaning/or check that they are properly seated/ie take them out and re-seat them back into there holders/the other possibility is you may have some print paper stuck in the ...

...holder) sits on the right side of the machine. There is a small hole in the metal frame where a sensor arm sits. This little black arm should move freely. I bet it does not and there is paper stuck ...

...cartridge holder. This means that there is some problem with printer's carriage, you'll need to check the plastic stick (around 1/4" wide). Also, check for any obstructions in the printer's carrriage ...

...stuck paper? Make sure the unit is powered off before continuing. On the right hand side of the print head holder - just to the right of the print cartridges is a lever. If you raise this lever the ...

holder cartridge position not correct, I push the holder cartridge till i can remove the cartridges, remove cartridges, turn off printer, turn on again, put the cartridges again. Then everything going

...Cartridge Holder is blocked". However, there isn't a jam to clear, as the manual advises. Hi You can Try 2 things. ERROR 5100 means that there is some foreign object blocking your cartridges carriage ...

...Cartridge Error) Solution: Reseat the print head iP3000 Reseat the print head Confirm that the printer is powered on. Open the paper output tray and top cover. Note: Gently open the paper output tray ...