ram terminals and connections for dust/debris clean if need be and replace making sure properly seated.check hd for dust/debris,bent pins.refit into housing correctly.insert battery.restart.if problem
Question about HP Presario Computers & Internet
...ram, doing a hard reset, pressing the escape button, taking out the hard drive, taking out RAM, but can't figure out why the computer won't boot or turn on. Any help would be greatly ...
Question about HP Presario Computers & Internet
...reset and also done that with the battery. Tried to then boot with battery and without. When I changed the memory from slot 1 to 2 the motherboard beeped 1 time, 3 times, 2 times and it had the same ...
...ram with one i have tested on another pc that works.I've removed the battery ,reset the bios (removal of cmos battery) ran the system with and without the battery (direct power) all to no avail.I've ...
Question about HP Presario Computers & Internet
...Reset 4 or 5 time a day Hello, I have a problem white the Compaq R3000 (intel)2800. After 3 years suddenly: I get a blue screen 4 or 5 times a day. I have reinstall XP Sp2 Pro (a clean installation) ...
Question about HP Presario Computers & Internet
...off the battery then the problem described as above occurred. somebody has mentioned a way out by resetting the memory module but i don't know how. i'd appreciate it if you could help me with that. ...
Question about HP Presario Computers & Internet
...ram as it dont need many programs. if you purchase 2 1gb sticks this will sort your problem out for under £40. To reset your computer back to factory setting, you will need to purchase a windows XP ...
...not the charger, and its not the battery. Tried taking the battery out and putting it back in. try resetting the bios (by removing the battery normally in ram
...If you don't see anything, check your monitor and video card first. Is everything connected? If they seem fine, your motherboard has some bad chips on it. First reset the RAM module/s and
RAM module. I wish I could tell you exactly how I did it, but I can't. I pushed the function buttons (F5, F8, F12, F anything) over and over and over...and over... again after pushing the power button
229 questions posted
Usually answered in minutes!
1,757 Questions
347 Questions
315 Questions
269 Questions
194 Questions