Question about HP Computers & Internet
...more than one DC Voltage scale, the Function knob is set to the 0-50 Volt DC scale. The Positive (Red) probe lead of the multimeter goes to the Center Hole, and the Negative (Black) probe lead of ...
...over a solid line.IF, there is more than one DC Voltage scale, set it to the 0 - 50 Volt scale.The red probe lead is the Positive lead.The black probe lead is the Negative probe lead.You are testing ...
Question about HP Presario Computers & Internet
...users come to FixYa to see if there is information on how to repair their problem, not be referred to a service center.Diagnose1) Start with the AC adapter (Charger)The Output is 19 Volts DC. ...
...system. After turning off a few times due to overheating, the problem is locked in until repaired now, and BIOS won't turn the Processor on until fixed.When a Processor overheats it turns ...
...RED probe lead (Positive), of the multimeter goes to.The outside cylindrical metal shell of the plug is the Negative connection. This is what the BLACK probe lead (Negative), touches against.You ...
...mounted to the motherboard.All 4 of those prongs go down into the motherboard, and are soldered to the motherboard.The prongs on the sides formed out of the metal case, are for support.The ...
...outside metal shell. The center hole is the Positive connection. This is where the Positive (Red) probe lead of the multimeter goes. The outside cylindrical metal shell is the Negative ...
...the pins and blade are on the Bottom of the jack.They go down through the motherboard, and are soldered in place.http://www.aaroncake.net/electronics/solder.htmScroll down to Step 5, and observe the ...
...symbol is a dotted line over a solid line.If more than one scale set it to the 0 - 50 volt scale.Red probe lead is the Positive lead.Black probe lead is the Negative lead.Have an assistant gently ...
229 questions posted
Usually answered in minutes!
1,757 Questions
347 Questions
315 Questions
269 Questions
194 Questions