HP Compaq Presario CQ50-110US Laptop "change boot sequence" Questions

...boot sequence option of bios)-there navigate with tab or arrow keys--save and exit or reset settings to default and exit--dont change any thing in bios settings until you are familiar with how to ...

...boot sequence from HDD to CD-ROM and put my XP CD in. On re-boot, it booted from the CD and I started the load sequence. I received an error message telling me that there was no HDD connected. I went ...

change the Boot order or Boot sequence. Select the booting device 1st boot from CD Rom. Save the setting. Insert windows XP Cd in CD Rom. Now Computer start from CD Rom. You follow the instruction and

...change anything Sounds like your bios options might need to be enabled (boot up sequence) that is if you have a decent operating system otherwise press F2 whilst booting to get into bios ...

...you need to change the boot sequence to the cd drive as number 1 and the hard drive as number 2 then press F10 to save and exit. then reboot the computer and it will boot off the cd. Hope this

...boot sequence will display then select the boot sequence to boot in your Hard Disk press enter. If the system will not load your Windows XP and still the problem same as your current problem then i ...

change the boot sequence which is at the moment set at hard drive to load from cd? Hi! You can change that in the BIOS setup. Depending on the brand of your computer on the start there is this message

...change the boot sequence Can anyone give me a little help? try disconnecting all of the likely boot sequence options (HD, CD drive, etc.) then see if you can get into the bios. What are you trying to ...

it will take you to CMOS (BIOS) settings. you can change the boot sequence. (you may need to read all the instruction on the page) (Some times it is + and - or even F5 and F6) Read the page carefully

boot up sequence in BIOS Setup has been changed so that the network boot is set before the hard drive, the symptom you describe fails. I would recommend that you do the following: 1. Check BIOS Setup