Sony VPL-EX5 Projector "cover error" Questions

...cover error where the lamp/cover led blinks and the machine does not light. The problem is still there even after i press the lamp cover switch manually. what else could i try? The small lamp cover ...

...cover error-- for this check the lamp cover 2 times red blinks very 2 seconds indicates temperature error. for this let the projector cool off check filters and fans that there is no blockage of air ...

cover error please help lamp/cover problem in sony es 4 is in two parts, in first case, the led keeps blinking.in this case problem is related with cover switches and thier connection with main board.

...I thought that the time of the lamp was over... but besides with the NEW lamp the problem persist. Any idea? check the lampm cover and the air filter cover. either can cause the error ...

...cover or finally and error in the logic control.You need to check the micro limit switch that is at the base of the lamp cover, check if this is closing and if the switch is showing contact- use a ...

...cover error of Sony VPL-EX5 projector? my projector is not working there lamp/cover signal indicator blink but projector not run. Take the lamp cover back off. Check the mechanism that the projector ...

Error message--the filter cap is not on correctly then the power shuts off Check that the filter cover is correctly installed and the little switch is activated by the cover

...Off) lamp cover or housing error 2 cycle (0.5sec On, 0.5sec Off) temperature error 4 cycle (0.5sec On, 0.5sec Off) fan(s) error 6 cycle (0.5sec On, 0.5sec Off) lamp error Which is your

...cover error or lamp housing error.  Replace the lamp cover or lamp housing correctly.[2]  If it blinks 2 cycles (0.5 seconds ON and 0.5 seconds OFF):  Temperature error.  The ...

...error Lamp/cover......I tried your solutions tightening the screw and removing the filter cover but I am still getting Lamp/Cover error. Would you please advice me how this is exactly solving your ...