Onkyo TX-SR606 Receiver "hdmi input" Questions

...HDMI input which works with other equipment.... For the RCA (composite) video input - it won't work, because this receiver don't have any video processing circuit. So HDMI input video goes to HDMI ...

...HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit. CHOICE = OTHER HDMI component connected to the HDMI OUT jack. NOTES ...

...input for the two HDMI inputs. 1. Go to the system setup 2. Select input setup 3.Select input assignment. 4. Select all the three input ,you are using as HDMI ok You may need to go into the menus for ...

...hdmi input selection on Yamaha rxv1600 Depending on what you are connecting to your HDMI inputs, rotating the input selector on the front panel (or one of the input selector buttons on remote), to ...

HDMI input setup. I have the HDMI cables connected as per this default set up. Still doesn't work. Is there some HDMI output enable selection somewhere? For me, it was the Monitor Out setting that had

...hdmi input on tv If the DENON has an HDMI output, and your TV has an HDMI input, then use a HDMI cable. Then, use the TV's remote-control to select "source" (or "input") as 'HDMI 2' or 'HDMI 3' ...

...the HDMI INPUT to DVD Select INPUT OUTPUT ASSIGN HDMI INPUT DVD - IN1 CBL/SAT - IN2 This may be your issue. Next step would be to verify your television input settings. Nice receiver! Best of

...Pro-RO5U works with coax ant inputs but not HDMI inputs 1 or 3 (with HDMI inputs enabled). Fixable? Works only with coax antenna inputs but not known proven HDMI input. board replacement to ...

...HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select input ...

...HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select input ...