Yamaha HTR-6130 Receiver "tv decoder stereo" Questions

...TV will pass Dolby Digital from any source connected to a HDMI port to the Optical Out. It will also pass DTS. But the internal Freeview DVB-T tuner doesn't generate Dolby Digital, just stereo and ...

tv had digital opti out run that to reivciver on digital input ok tell blue ray options menu also digital oput bitrate ok Check audio output on blu ray. Set to bitstream legacy to properly output dd ,

Are you using a Decoder to receive the TV signal? When you say " hook speaker wires to the TV" - do you mean via the Sony SE501 receiver??Just tell me what components you have and I can help you

TV via HDMI and inbound audio from HDTV is optical fiber (TOSLINK). Up until today, this has worked perfectly, i.e., audio has auto-decoded and the blue decoding light will display appropriately for 5

...tv shows andsome commercials. But sone commercials have no sound. Why? if your saying that overall the sound works just fine but just some commercials don't have sound , this surely is a cause that ...

...tv, after a few minutes every couple of seconds a different source is selected by the receiver itself. Go over here: http://denon.custhelp.com/cgi-bin/denon.cfg/php/enduser/std_alp.php?p_sid=1NlVrsDj ...

tv. Well you have a built in decoder/surround processor that will detect a signal with the surround sound info(dvd/sat.receiver/cable converter etc.) and will then process it to the different speakers

...tv but no audio is coming through my stereo system. Makes no sense to me, and is racking my brain. The HTR-6130 cannot decode HDMI audio. It can only act as an HDMI switch. To get the audio from the ...

...stereo speakers. I need to use RCA cables because the pre-amp doesn't have HDMI input capability. What kind of cable (2 or 3 male) and what ports do I use on both units? If you have audio out ...

...right front and the left surround speakers do not produce any sound. Can you help me? you probably have to set it to multi chanal mode , while tv is most stereo the receiver has to decode that to ...