Yamaha HTR-6130 Receiver "turn decoder" Questions

turn on the decoder? I sense two different problems or one not completely described. The followinbg would address the decoder issue. It partially depends on what it is you're trying to play or how you

...a subwoofer. All my settings on my reciver are set to auto. I also have the Bi-Amp set to on. If I turn the bi-amp off the SBL/SBR speakers do not work for tv viewing or blu-ray viewing. Are there ...

I have a sony STR-DB930.... The blue multichannel decoding lamp comes on when the dvd player is turned on. But does not remain lit while watching a bluray disc The blue multichannel decoding lamp does

...turn on my reciever it automatically displays decoder on it and will not let me watch TV until it has sat on the decoder for like 10-15 min. I will push the Video 2 button for TV over and over and it ...

encoders. When you spin the encoder it sends a binary signal to a decoder chip that will in turn increment or decrement the volume. Either your decoder chip is bad or the encoder itself needs replaced

Cannot get my yamaha rx-v663 to decode DolbyTrueHD audio of get my SBL/SBR speakers to work without turning the bi-amp on. You should always connect with HDMI when using and decoding HD sound formats.

...turn the radio on because I don't have the code!!! You just need to recover the radio's serial number to decode the 4 digit radio key. The full process and decoder is available here: Porsche Boxster: ...

...TV from Directv sat (haven't tried blu-ray yet): 1. even though vol starts at -80db, I have to turn volume all the way up to -35 before can really listen at all and if I want any decent volume ...

RXV 995 SUB output is DEAD I bough a 995 on craigslist. The sub output is dead. Yes, I have it turned on in the menu and have set to "both" mains & sub. I have tried different subs to make sure. I ...

There is no sound comming out of my tv at all 1-turn volume up. 2-check connection to speaker and other equipment. 3-turn off the tape monitor. 4-select the correct source. 5-change d-input setting to