Samsung SWA-4000 "speakers" Questions

Denon AVR-3802 Power cuts out and standby light blinks when connected to speakers. Works fine with headphones. Suggestions? I have repaired many of these Denon receivers over the last few years. Since

...current or DC voltage on the outputs. Unfortunately the only way to determain if it is the speakers is to change them with other known good speakers and see if it still happens. But before ...

...rear surround. Hey there. I had the same problem until i figured out that if u dont have surround speakers connected it will be a error when trying to configure the rear surround speakers. So if u ...

When I hook up the rear speakers to my in-wall speakers, I can't get any sound. I have speaker button 1 and 2 selected. Hi: you need to clear that you connect wall speakers for font,center or rear ...

Hi - I have a Sony V444ES receiver that I have four speakers on A (in house) and two on B (outside). I hooked up a third speaker (rock speaker) for outside use however the sound is very low compared ...

rear speakers don't work Surround sound won't work on two rear speakers and center speaker, but it does on the subwoofer and front speakers. but when i go through the menu to do the speaker test, all ...

can you run 200watt 6ohm speakers on the RX-V490 I keep blowing speaker parts, 1 teeter, 2 woofers and an trying to solve the problem, playing cds through the LD section so we can watch dvd music. Hi ...

B speaker setup problem I have a Yamaha RX-V663 receiver. I want to use the "extra speakers" as a B speakers outside on my patio. I have the "extra sp assign" setting set to zone B. The Problem: When ...

...help! go to audio set up and configure the system for 5.1 or higher sound output.then only all the speakers ll work Just play around with output quality 5.1 , 7.1 . You see different types of