Nortel T7316E 2-Line Corded Phone "system lines showing" Questions

...system has 2 lines and that's all. Go into system programming and assign the number of lines and intercoms to a phone. After that, you can copy the buttons from a working phone to the new phone and ...

...system: How do I unblock access to outside lines? No lights show on the dead lines. Handset works in other offices. Samsung IDCS 28D system: Any Handset plugged in to this office extension stopped ...

...in the office Contact your line provider the system cannot see the lines , if you have ISDN lines these should show a green light on each and should be solid when connected and flash if ...

...incoming line show In-use. But neither is able to hang up Power cycle the system. You need to go into lines/trunks and change the line typ from unsupervised to supervised so this will

lines have defaulted to pulse dialing that you have an older Nortel system such as an 8x24 or a 6x16 system. That being said you'll need to program touch tone dialing on each line. Programming is done

...system lines, Left Intercom (the factory setting) ? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory setting), Pools 881-883, individual lines For each button ...

system should be configured so that the desired lines, whether CO or extensions, are set to "Appear and Ring" on each set. Config... Terminals&sets... Show Set... (enter #)... Find...Line Access..

Only First Phone in the system will ring on incoming calls We purchased a Norstar ICS system with M7310 phones. One the first phone in the system will ring on incoming calls. I am looking for the ...

...not able to receive incoming calls on that line now. the easist way to reset that is to reset the system. unplug it for a moment that should clear

...fax and phone I recently dropped our primary line and kept Line 2 on our home Norstar Compact ICS system (using M7310 phone). We used line 2 as our fax line and the trunk was directed into the ...