lights 1&2 flashing.any ideas? 1, Tilt machine and remove base plate 6 screws. 2, fixed to the inner ring at the bottom of the machine is the water level control. (brown, round with 3/4 wires attached
...exhaust properly, the dryer heating circuits will actually overheat and eventually fail. The result is a hot dryer with clothes that will not dry. If you suspect you have a dryer vent problem, remove ...
Question about Dishwashers
...exhaust pipe (usually a grey crinkly pipe) from the sink u-bend. Stick a screw driver into the ubend connector and make sure there is no gunk there blocking it up. 2. Remove the filters at the bottom ...
...REMOVE THE DOOR COVER. THE LEAKAGE OCCURS IN THE BEGINNING OF THE CYE SO IT IS FAIRLY EASY TO TRY. IF THAT IS NOT A SUCCESS THEY DROP OF CAULK ON THE ONE OF THE DOOR EDGE TO PUSH THE GASKET SO THAT ...
...lights are out. We do not have a garbage disposal, and the roof vent is clear. The smell is horrible. We have tried everything we have read...vinegar, baking soda, the bleach. The smell goes away for ...
...remove the intake baffle from between the fan and it's rectangular inlet, make a note of how many holes are covered and open. You might have 8 open and 4 half open for instance. Thoroughly clean the ...
142 questions posted
Usually answered in minutes!
42 Questions
26 Questions
13 Questions