Carrier 38BRC036 Air Conditioner "codes 3 short furnace" Questions

...short 3 longs) NOTICE what's happening with ALL the burner Tubes each time it attempts to ignite. If only one or two are running....then this is your problem. To fix all you do is take out the burner ...

...3 short flashes (I don't have the codes), and the only way to get it working again is a reset (shut off the power to the system). Any ideas? Thanks having a problem with a weather maker 8000. It will ...

furnace i have is blinking 3 times with a pause. i have checked the vent pressure switch with an ohm meter. reading is 0. blew into the hose and could hear the click of the limit switch also watch the

...3 flashes, 1 short flash and 2 long flashes Can anyone tell me what this error message is? At start up the fan runs for about a minute or two, then the igniter heats up and starts the burners, after ...

3 short then three long what is the code code 33 LIMIT OR FLAME ROLL-OUT SWITCH IS OPEN - If open longer than three minutes, code changes to #13. Flame roll-out switch requires manual reset. Check for

...3 slow flashes, please help if you can. EACH OF THE FOLLOWING STATUS CODES IS A TWO DIGIT NUMBER WITH THE FIRST DIGIT DETERMINED BY THE NUMBER OF SHORT FLASHES AND THE SECOND DIGIT BY THE NUMBER OF ...

...short.....the problem is the paper that is usually posted on the cover is gone,so there is no way to see what is the calling code.any help would be appreciated,,,,,,,,,,,, Sorry to read about your ...

...3 short and then 3 long cant figure out what that means can anyone please help, pregnant and cold not a good combo. Code 33 is "limit is open or flame switch is open" FIRST make sure the filter is ...

...3, or 4 of the wires. there should be a standard. terminals on thermostats and furnace, aircons are labelled, but the labelling is often contradictory. some thermostats have function to control the ...

...3 hour lockout but you can manually reset it by killing the power to unit... allow it to start up again... some units once repowered will start off with the blower running for 90-120 seconds as a ...