...thermostst displays the The Carrier comfort zone thermostat displays the SF 03 message on all 3 zones. Go to panal and reset control. Small reset button on control board. Let me know if it ...
...Comfort Control Center, four or five button, then turn off the thermostat, hold down the mode and zone buttons at the same time and turn the tstat back on. When EE appears on the screen, then release ...
Question about Ruud Heating & Cooling
reset preset programs on my thermostat? I do not want any programs set. I want to manually adjust temperatures on my own. My thermostat is a ruud contour comfort control model. We moved into the house
...comfort control center 3109228.001. I get an error code ee and have no information as to what this code is this is the only thing that will appear on the thermostat The thermostat needs to be reset. ...
comfort control, turn the thermostat off. While holding down the mode and zone buttons, turn the tstat back on and hold the buttons until FF appears in the display. Release the buttons and then see if
...comfort control. Follow these steps to reset: To initiate a RESET, do the following in the order listed: 1) Turn control on to ensure annunciator data and light are present. If data and light are ...
Question about Dometic Heating & Cooling
...comfort control. Turn off thermostat from main power switch at bottom. Hold zone and mode button down at the same time. Turn on thermostat from main power switch. Display should read FF If done ...
Question about Dometic Heating & Cooling
...c. When a dip switch is turned on or off after initial configu ration, a system reset will need to be done before the Comfort Control CenterTM will recognize the updated selection Hope this ...
...I checked the 120 volt input. All were fine. I reset the Duo Therm thermostat, however the unit still will not go on. Any sugestions? sounds like thermostat issue not communicating with relay ...
reset the thermostat according to the manual, but the heat still comes on. I would like to find an electrical schematic for the unit. The circuitboard has switches that may solve the problem, but with
349 questions posted
Usually answered in minutes!
347 Questions
334 Questions
96 Questions
89 Questions
65 Questions
