90 degrees clockwise toward the spring to release it. Undo the hose clamps and blow down the hose. Blow into the pressure switch to make sure a contact isn't stuck. I took the bottom panel off the
Question about GE Washing Machines
...90 degree curve to an opening. No hose is connected to the bottom open end. When we've had water on the floor after a cycle, this is the only place that there is water dripping from. None under the ...
...90 weight gear oil. I suggest that you replace the clutch at the same time. The clutch is the round thing sitting no top of the transmission. The basket drive is the thing sticking out of center of ...
Question about Kenmore Washing Machines
...90 series not spinning or draining, leaking My Kenmore 110-82892100 washer will fill and agitate, but then motor makes a (quiet) sound like it is trying to run, and washer will not drain or spin. It ...
...90 series, Model 110.26912690, Ser.#CG1395101 1. Find out where the leak is coming from. Does it leak constantly or during one part of the cycle? A constant leak means the leak is in the valve where ...
...hose for the washing machine. Once they left everything was fine and the smell seemed to have gone. However, we ran a boil wash to clear any residue and the drum still smelt horrible. Since then we ...
180 questions posted
Usually answered in minutes!
49 Questions
27 Questions
14 Questions
8 Questions
8 Questions