Alessi MG32 Cordless Electric Kettle "heating element" Questions

heating element stopped working, although an electrical sensing device indicates the base charging unit is receiving power. I've disassembled the bottom of the pot but can find nothing obviously wrong

...heating element is not able to be used. Before changing the thermo fuse, you can test it with an ohm meter. It should typicaly read about 0.1 to 0.2 ohms. The heating element resistance should ...

...heating element or the thermostat installed in line with the element. The heating element can be tested using a multimeter. A good element will read from 20 to 80 Ohms (depending on type and model). ...

...heating element, thermostat, and thermal fuse.What has happened is the element got too hot and the thermal fuse opened.There is no reset button.In some cases you may run across a defective heating ...

...heating element in Krups stainless kettle has burned out We have established that it is the element that has burned out and want to know where to get a replacement and how to remove the existing ...

...heating up, the water next to the element turns to gas and starts to rise to the top. Since the gas bubbles are small at first, they turn back to water before reaching the surface and water rushes in ...

My Bravetti electric kettle doesn't heat up. It's plug in fine and the indicator lights are on but it doesn't heat the water. What could be the problem??? Help. The element is fused. replace the ...

...... worked once and now again will not work. Chances are the heating element has been fading until it can no longer operate. You can try to have the heating element replaced or replace the