Carrier XHB123D X/Y Series Heat/Cool Air Conditioner "conditioner high pressure" Questions

...high pressure switches I was once told that a high pressure overload can be caused by low charge to a unit. I have never heard of such thing, can you please elaborate the details of a high pressure ...

conditioner high pressure side. The utility port (the middle chamber) is a place you connect the hose to vacuum pump, recovery units or add or remove refrigerant from AC units. Air conditioning gauges

4 out door inverter. all in door unit show error code CH24 pls help CH 24-Splits and Multi Splits = High or low pressure trip. Low at 1 bar High at 35 bar check pressures. Multi V = High pressure trip

...high pressure switch Condenser coil is dust blocked.-Clean it. Rpm of fan motor is less-Replace capacitor. If over charged gas- release some gas. Check for continuity for high pressure switch, if no ...

Why are my high pressure real low and low pressure is good on my r-22 heat pumpWhat is wrong. high side is dependant on outside air temp.... or could be a restriction in high side line

high pressure line read to be fully charged on my RUUD UAKA-042 a/c unit? The specs on the unit has a design pressure of 300 PSI on the high pressure line and 150 PSI on the low pressure line. Is that

...high pressure, what is the normal low and high pressure, R-22..?????????????? High pressure any where from 200-325. Low pressure around 65-70ish. But pressure doesn't really tell you much about how ...

...and high sides while the machine is running, partially block the outdoor fan until the high pressure reaches 270 psi, the low pressure should be 70 psi at this time. This should be true within 10

...jeep cherokee sport The high pressure is the line going to the condenser (aluminum grille in front of the radiator). The low pressure is the line going inside the vehicle (should be the bigger

...conditioner.keeps turning itself off and the opertation light keeps flashing a/c units have ways of protecting their major components. if you have a freon leak it could be shutting down on low ...