...turn when mixer is turned on. No problems with motor. Beaters are in correct positions and properly turning. Turntable just does not turn. Mixer has worked great and had no problems. Just suddenly ...
...hum but no blade turn if bottom seal worn and material leaks into shaft. Rekove drive head and try turning shaft if nio go dissasemble entire unit ,clean and service, replace ...
Question about KitchenAid Food Mixers
...straining to turn without moving (it won't last very long like that) or the sound of the motor turning but not operating the
Location of overheat reset button on Hobart HS 30s Turn your thermostat off by switching it to the off position. Find the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn
Question about KitchenAid Food Mixers
on the top left to the left a quarter turn while the mixer is in the stir position. it should start turning. if not turn the screw on the right a quarter turn, the mixer should start, if not turn back
Question about KitchenAid Food Mixers
blade is hitting the bowl and the screw will not turn anymore I tried to adjust the screw so the blade would not hit the bowl, but it will not turn to the left any further. Does ant one know what is ...
Sunbeam hand mixer. One beater not working My Sunbeam 2485 has a great moter but one of the beaters does not turn. I had taken the mixer apart and discovered a small metal spring pin was not attached.
H-600 Turn Handle slips, bowl does not go back down Turned the handle like always and now the bowl does not go back down, handle turns with some noise Does the handle seem to move easier?there is a ...
attachments won't turn my attachments won't turn anymore. the motor is working but no turning takes place. Also how do you get the machine apart to see what is broke? most likely a stripped worm gear ...
5 questions posted
Usually answered in minutes!
5 Questions
1 Questions
2 Questions
2 Questions
1 Questions